Enter SPECIAL5 at Checkout for 5% OFF & Free Shipping Australia Wide

{"id":3831771037741,"title":"MakerFocus M5Stack ESP32 M5GO IoT Starter Kit with ESP32 16M Flash, MPU9250 Motion Sensor, 550mAh Lithium Battery and Grove Cables for MicroPython\/Arduino Programming Over Internet and DIY","handle":"makerfocus-m5stack-esp32-m5go-iot-starter-kit-with-esp32-16m-flash-mpu9250-motion-sensor-550mah-lithium-battery-and-grove-cables-for-micropython-arduino-programming-over-internet-and-diy","description":"\u003ch3\u003eMakerFocus M5Stack ESP32 M5GO IoT Starter Kit with ESP32 16M Flash, MPU9250 Motion Sensor, 550mAh Lithium Battery and Grove Cables for MicroPython\/Arduino Programming Over Internet and DIY\u003c\/h3\u003e\u003cp id=\"b\"\u003e\u003cb\u003eComponent:\u003c\/b\u003e\u003cbr\u003eIt has a pair of infrared transmitting and receiving tube, tube infrared emit a certain frequency, when detecting direction meet with obstacles (reflecting surface), reflected infrared receiving tube, after the comparator circuit processing, green indicator will light up, at the same time signal output interface to output digital signal.\u003cbr\u003eThe HUB Unit is a module for M5GO to expand GROVE port added three GROVE ports for user. So you can control 3 GROVE devices with only one M5GO Core at a time.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003cbr\u003eM5GO:\u003c\/b\u003e\u003cbr\u003eSupport MicroPython \/ Arduino Programming over Internet\u003cbr\u003eBlockly\u003cbr\u003eCompatible with LEGO\u003cbr\u003eSupport TF Card\u003cbr\u003e\u003cb\u003eIR Unit:\u003c\/b\u003ecan detects the distance 2 ~5cm\u003cbr\u003e\u003cb\u003eENV Unit:\u003c\/b\u003eTemperature:measuring range: 20 ~60℃,resolution: ±0.2℃\u003cbr\u003eHumidity:measuring range: 20 ~95℃,resolution: 0.1%\u003cbr\u003eAir pressure:measuring range: 300 ~1100hPa,resolution: ±1hPa\u003cbr\u003e\u003cb\u003ePIR Unit:\u003c\/b\u003eDetects the distance 150cm\u003cbr\u003e\u003cbr\u003e\u003cb\u003eParameter:\u003c\/b\u003e\u003cbr\u003eESP32: 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth\u003cbr\u003eInput: 5V 550mAh\u003cbr\u003eInterface:TypeC *1, GROVE(I2C+I\/0+UART), Pogo Pin * 1\u003cbr\u003eLCD: 2 inch, 320 * 240 Colorful TFT LCD, ILI9342\u003cbr\u003eMicrophone: MEMS Analog BSE3729 Microphone\u003cbr\u003eMEMS:MPU6050, MAG3110\u003cbr\u003eOp.Temp.: 32°F to 104°F ( 0°C to 40°C )\u003cbr\u003eCase: Plastic ( PC )\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Including\u003c\/b\u003e\u003cbr\u003e1 * M5Stack M5GO\u003cbr\u003e1 * M5GO Bottom\u003cbr\u003e1 * ENV Unit\u003cbr\u003e1 * IR Unit\u003cbr\u003e1 * RGB Unit\u003cbr\u003e1 * PIR Unit\u003cbr\u003e1 * POT Unit\u003cbr\u003e1 * HUB Unit\u003cbr\u003e1 * Type-C USB Cable\u003cbr\u003e1 * User Manual\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul class=\"a\"\u003e \u003cli\u003eDocuments: Download the code here: Note: The instruction is equipped with the product!\u003c\/li\u003e \u003cli\u003eM5Stack ESP32 Development Kt: The M5Stack M5GO is a development kit based on ESP32 chip. You can even program it through Arduino or MicroPython. It's a blockly and stackable IoT kit, can compatible with LEGO and support TF Card. It also features a Six-Axis (Gyro + Accelerometer), 3-Axis Digital Magnetometer, MEMS(MPU9250) and a TFT LCD, so you can create a 3D remote gesture controller, a simple \"Leap Motion\" via M5Stack M5GO in a day in stead of couple weeks and so on.\u003c\/li\u003e \u003cli\u003eThe POT Unit is a potentiometer sensor for M5GO that can detect rotary angle. The RGB Unit is a sensor including three RGB LED lights and two GROVE ports.You can display specified color using M5GO Core through Arduino or MicroPython.\u003c\/li\u003e \u003cli\u003eThe IR Unit is a IR infrared obstacle avoidance sensor for M5GO. It can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on. The ENV Unit is a environment sensor for M5GO that can easily detect temperature, humidity and air pressure with M5GO Core, including temperature and humidity sensor and absolute barometric pressure sensor.\u003c\/li\u003e \u003cli\u003eThe HUB Unit is a module for M5GO to expand GROVE port added three GROVE ports for user. So you can control 3 GROVE devices with only one M5GO Core at a time. The PIR Unit is a human infrared sensor for M5GO that can easily detect whether someone appears in front of it with M5GO Core.\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2019-06-17T10:48:32+10:00","created_at":"2019-06-17T10:48:32+10:00","vendor":"MakerFocus","type":"Single Board Computers","tags":["Computer Components","Computers \u0026 Accessories","cp137","Single Board Computers"],"price":40300,"price_min":40300,"price_max":40300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29084410183725,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07F8QR7NB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MakerFocus M5Stack ESP32 M5GO IoT Starter Kit with ESP32 16M Flash, MPU9250 Motion Sensor, 550mAh Lithium Battery and Grove Cables for MicroPython\/Arduino Programming Over Internet and DIY","public_title":null,"options":["Default Title"],"price":40300,"weight":240,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"192701855994","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/71LYKIRGgWL._SL1200.jpg?v=1601932964","\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/71YQbF4lDSL._SL1200.jpg?v=1601932964","\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/71hyZOtdOrL._SL1200.jpg?v=1601932964","\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61eGuEgEgqL._SL1200.jpg?v=1601932964","\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61OD_2BcdfDdL._SL1200.jpg?v=1601932964","\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61ugzFDUOvL._SL1200.jpg?v=1601932964","\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61wmM0DS3YL._SL1200.jpg?v=1601932964","\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/712fzdXlzfL._SL1200.jpg?v=1601932964","\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/71xolsfu-aL._SL1200.jpg?v=1601932964"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/71LYKIRGgWL._SL1200.jpg?v=1601932964","options":["Title"],"media":[{"alt":"Australia MakerFocus M5Stack ESP32 M5GO IoT Starter Kit with ESP32 16M Flash, MPU9250 Motion Sensor, 550mAh Lithium Battery and Grove Cables for MicroPython\/Arduino Programming Over Internet and DIY ","id":3967959203903,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/71LYKIRGgWL._SL1200.jpg?v=1570526026"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/71LYKIRGgWL._SL1200.jpg?v=1570526026","width":1200},{"alt":"Australia MakerFocus M5Stack ESP32 M5GO IoT Starter Kit with ESP32 16M Flash, MPU9250 Motion Sensor, 550mAh Lithium Battery and Grove Cables for MicroPython\/Arduino Programming Over Internet and DIY ","id":3967959269439,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/71YQbF4lDSL._SL1200.jpg?v=1570526026"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/71YQbF4lDSL._SL1200.jpg?v=1570526026","width":1200},{"alt":"Australia MakerFocus M5Stack ESP32 M5GO IoT Starter Kit with ESP32 16M Flash, MPU9250 Motion Sensor, 550mAh Lithium Battery and Grove Cables for MicroPython\/Arduino Programming Over Internet and DIY ","id":3967959334975,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/71hyZOtdOrL._SL1200.jpg?v=1570526026"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/71hyZOtdOrL._SL1200.jpg?v=1570526026","width":1200},{"alt":"Australia MakerFocus M5Stack ESP32 M5GO IoT Starter Kit with ESP32 16M Flash, MPU9250 Motion Sensor, 550mAh Lithium Battery and Grove Cables for MicroPython\/Arduino Programming Over Internet and DIY ","id":3967959400511,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61eGuEgEgqL._SL1200.jpg?v=1570526026"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61eGuEgEgqL._SL1200.jpg?v=1570526026","width":1200},{"alt":"Australia MakerFocus M5Stack ESP32 M5GO IoT Starter Kit with ESP32 16M Flash, MPU9250 Motion Sensor, 550mAh Lithium Battery and Grove Cables for MicroPython\/Arduino Programming Over Internet and DIY ","id":3967959466047,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61OD_2BcdfDdL._SL1200.jpg?v=1570526026"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61OD_2BcdfDdL._SL1200.jpg?v=1570526026","width":1200},{"alt":"Australia MakerFocus M5Stack ESP32 M5GO IoT Starter Kit with ESP32 16M Flash, MPU9250 Motion Sensor, 550mAh Lithium Battery and Grove Cables for MicroPython\/Arduino Programming Over Internet and DIY ","id":3967959531583,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61ugzFDUOvL._SL1200.jpg?v=1570526026"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61ugzFDUOvL._SL1200.jpg?v=1570526026","width":1200},{"alt":"Australia MakerFocus M5Stack ESP32 M5GO IoT Starter Kit with ESP32 16M Flash, MPU9250 Motion Sensor, 550mAh Lithium Battery and Grove Cables for MicroPython\/Arduino Programming Over Internet and DIY ","id":3967959564351,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61wmM0DS3YL._SL1200.jpg?v=1570526026"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61wmM0DS3YL._SL1200.jpg?v=1570526026","width":1200},{"alt":"Australia MakerFocus M5Stack ESP32 M5GO IoT Starter Kit with ESP32 16M Flash, MPU9250 Motion Sensor, 550mAh Lithium Battery and Grove Cables for MicroPython\/Arduino Programming Over Internet and DIY ","id":3967959597119,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/712fzdXlzfL._SL1200.jpg?v=1570526026"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/712fzdXlzfL._SL1200.jpg?v=1570526026","width":1200},{"alt":"Australia MakerFocus M5Stack ESP32 M5GO IoT Starter Kit with ESP32 16M Flash, MPU9250 Motion Sensor, 550mAh Lithium Battery and Grove Cables for MicroPython\/Arduino Programming Over Internet and DIY ","id":3967959629887,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/71xolsfu-aL._SL1200.jpg?v=1570526026"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/71xolsfu-aL._SL1200.jpg?v=1570526026","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eMakerFocus M5Stack ESP32 M5GO IoT Starter Kit with ESP32 16M Flash, MPU9250 Motion Sensor, 550mAh Lithium Battery and Grove Cables for MicroPython\/Arduino Programming Over Internet and DIY\u003c\/h3\u003e\u003cp id=\"b\"\u003e\u003cb\u003eComponent:\u003c\/b\u003e\u003cbr\u003eIt has a pair of infrared transmitting and receiving tube, tube infrared emit a certain frequency, when detecting direction meet with obstacles (reflecting surface), reflected infrared receiving tube, after the comparator circuit processing, green indicator will light up, at the same time signal output interface to output digital signal.\u003cbr\u003eThe HUB Unit is a module for M5GO to expand GROVE port added three GROVE ports for user. So you can control 3 GROVE devices with only one M5GO Core at a time.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003cbr\u003eM5GO:\u003c\/b\u003e\u003cbr\u003eSupport MicroPython \/ Arduino Programming over Internet\u003cbr\u003eBlockly\u003cbr\u003eCompatible with LEGO\u003cbr\u003eSupport TF Card\u003cbr\u003e\u003cb\u003eIR Unit:\u003c\/b\u003ecan detects the distance 2 ~5cm\u003cbr\u003e\u003cb\u003eENV Unit:\u003c\/b\u003eTemperature:measuring range: 20 ~60℃,resolution: ±0.2℃\u003cbr\u003eHumidity:measuring range: 20 ~95℃,resolution: 0.1%\u003cbr\u003eAir pressure:measuring range: 300 ~1100hPa,resolution: ±1hPa\u003cbr\u003e\u003cb\u003ePIR Unit:\u003c\/b\u003eDetects the distance 150cm\u003cbr\u003e\u003cbr\u003e\u003cb\u003eParameter:\u003c\/b\u003e\u003cbr\u003eESP32: 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth\u003cbr\u003eInput: 5V 550mAh\u003cbr\u003eInterface:TypeC *1, GROVE(I2C+I\/0+UART), Pogo Pin * 1\u003cbr\u003eLCD: 2 inch, 320 * 240 Colorful TFT LCD, ILI9342\u003cbr\u003eMicrophone: MEMS Analog BSE3729 Microphone\u003cbr\u003eMEMS:MPU6050, MAG3110\u003cbr\u003eOp.Temp.: 32°F to 104°F ( 0°C to 40°C )\u003cbr\u003eCase: Plastic ( PC )\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Including\u003c\/b\u003e\u003cbr\u003e1 * M5Stack M5GO\u003cbr\u003e1 * M5GO Bottom\u003cbr\u003e1 * ENV Unit\u003cbr\u003e1 * IR Unit\u003cbr\u003e1 * RGB Unit\u003cbr\u003e1 * PIR Unit\u003cbr\u003e1 * POT Unit\u003cbr\u003e1 * HUB Unit\u003cbr\u003e1 * Type-C USB Cable\u003cbr\u003e1 * User Manual\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul class=\"a\"\u003e \u003cli\u003eDocuments: Download the code here: Note: The instruction is equipped with the product!\u003c\/li\u003e \u003cli\u003eM5Stack ESP32 Development Kt: The M5Stack M5GO is a development kit based on ESP32 chip. You can even program it through Arduino or MicroPython. It's a blockly and stackable IoT kit, can compatible with LEGO and support TF Card. It also features a Six-Axis (Gyro + Accelerometer), 3-Axis Digital Magnetometer, MEMS(MPU9250) and a TFT LCD, so you can create a 3D remote gesture controller, a simple \"Leap Motion\" via M5Stack M5GO in a day in stead of couple weeks and so on.\u003c\/li\u003e \u003cli\u003eThe POT Unit is a potentiometer sensor for M5GO that can detect rotary angle. The RGB Unit is a sensor including three RGB LED lights and two GROVE ports.You can display specified color using M5GO Core through Arduino or MicroPython.\u003c\/li\u003e \u003cli\u003eThe IR Unit is a IR infrared obstacle avoidance sensor for M5GO. It can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on. The ENV Unit is a environment sensor for M5GO that can easily detect temperature, humidity and air pressure with M5GO Core, including temperature and humidity sensor and absolute barometric pressure sensor.\u003c\/li\u003e \u003cli\u003eThe HUB Unit is a module for M5GO to expand GROVE port added three GROVE ports for user. So you can control 3 GROVE devices with only one M5GO Core at a time. The PIR Unit is a human infrared sensor for M5GO that can easily detect whether someone appears in front of it with M5GO Core.\u003c\/li\u003e\n\u003c\/ul\u003e"}

MakerFocus M5Stack ESP32 M5GO IoT Starter Kit with ESP32 16M Flash, MPU9250 Motion Sensor, 550mAh Lithium Battery and Grove Cables for MicroPython/Arduino Programming Over Internet and DIY

In Stock. Leaves warehouse in 2-3 business days

Brand: MakerFocus
$403.00 AUD
Maximum quantity available reached.
Free Shipping Australia Wide
100% Safe & Secure Checkout
100 Days Return Policy *
1 Year Warranty *

MakerFocus M5Stack ESP32 M5GO IoT Starter Kit with ESP32 16M Flash, MPU9250 Motion Sensor, 550mAh Lithium Battery and Grove Cables for MicroPython/Arduino Programming Over Internet and DIY

Component:
It has a pair of infrared transmitting and receiving tube, tube infrared emit a certain frequency, when detecting direction meet with obstacles (reflecting surface), reflected infrared receiving tube, after the comparator circuit processing, green indicator will light up, at the same time signal output interface to output digital signal.
The HUB Unit is a module for M5GO to expand GROVE port added three GROVE ports for user. So you can control 3 GROVE devices with only one M5GO Core at a time.

Features:
M5GO:

Support MicroPython / Arduino Programming over Internet
Blockly
Compatible with LEGO
Support TF Card
IR Unit:can detects the distance 2 ~5cm
ENV Unit:Temperature:measuring range: 20 ~60℃,resolution: ±0.2℃
Humidity:measuring range: 20 ~95℃,resolution: 0.1%
Air pressure:measuring range: 300 ~1100hPa,resolution: ±1hPa
PIR Unit:Detects the distance 150cm

Parameter:
ESP32: 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth
Input: 5V 550mAh
Interface:TypeC *1, GROVE(I2C+I/0+UART), Pogo Pin * 1
LCD: 2 inch, 320 * 240 Colorful TFT LCD, ILI9342
Microphone: MEMS Analog BSE3729 Microphone
MEMS:MPU6050, MAG3110
Op.Temp.: 32°F to 104°F ( 0°C to 40°C )
Case: Plastic ( PC )

Package Including
1 * M5Stack M5GO
1 * M5GO Bottom
1 * ENV Unit
1 * IR Unit
1 * RGB Unit
1 * PIR Unit
1 * POT Unit
1 * HUB Unit
1 * Type-C USB Cable
1 * User Manual

Product Features

  • Documents: Download the code here: Note: The instruction is equipped with the product!
  • M5Stack ESP32 Development Kt: The M5Stack M5GO is a development kit based on ESP32 chip. You can even program it through Arduino or MicroPython. It's a blockly and stackable IoT kit, can compatible with LEGO and support TF Card. It also features a Six-Axis (Gyro + Accelerometer), 3-Axis Digital Magnetometer, MEMS(MPU9250) and a TFT LCD, so you can create a 3D remote gesture controller, a simple "Leap Motion" via M5Stack M5GO in a day in stead of couple weeks and so on.
  • The POT Unit is a potentiometer sensor for M5GO that can detect rotary angle. The RGB Unit is a sensor including three RGB LED lights and two GROVE ports.You can display specified color using M5GO Core through Arduino or MicroPython.
  • The IR Unit is a IR infrared obstacle avoidance sensor for M5GO. It can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on. The ENV Unit is a environment sensor for M5GO that can easily detect temperature, humidity and air pressure with M5GO Core, including temperature and humidity sensor and absolute barometric pressure sensor.
  • The HUB Unit is a module for M5GO to expand GROVE port added three GROVE ports for user. So you can control 3 GROVE devices with only one M5GO Core at a time. The PIR Unit is a human infrared sensor for M5GO that can easily detect whether someone appears in front of it with M5GO Core.

Buy with confidence as this product comes with 18 months full local warranty in Australia & New Zealand (unless otherwise stated in the overview).

This product also comes with the benefits of the CocoonPower Warranty. For further details please read our Warranty Guidelines.

You can also purchase 3 Year Extended Care. If you are interested please see our Extended Care Information.