Enter SPECIAL5 at Checkout for 5% OFF & Free Shipping Australia Wide

{"id":1575918403629,"title":"Replacement Antenna for Realistic or Radio Shack scanners That use a Telescopic Antenna with Male Screw Threads and Have a 7mm or Larger Hole in The top of The Scanner Cabinet.","handle":"replacement-antenna-for-realistic-or-radio-shack-scanners-that-use-a-telescopic-antenna-with-male-screw-threads-and-have-a-7mm-or-larger-hole-in-the-top-of-the-scanner-cabinet","description":"\u003ch3\u003eReplacement Antenna for Realistic or Radio Shack scanners That use a Telescopic Antenna with Male Screw Threads and Have a 7mm or Larger Hole in The top of The Scanner Cabinet.\u003c\/h3\u003e\u003cp id=\"b\"\u003eReplacement antenna for Realistic and Radio Shack scanners that use a telescopic antenna with MALE SCREW THREADS (See photo) and have a 7mm or larger hole in the top of the scanner cabinet. If the hole is smaller than 7mm it will have to be drilled out to make a larger opening. All band coverage 30 – 900MHz. Extends from 6-1\/2\" collapsed to 32\" extended. 7 telescoping sections which can be adjusted to the exact length as needed. Fits scanner models that have a 7mm or larger hole in the top of the scanner cabinet. (If cabinet hole is smaller than 7mm, this will not fit or work). Does not fit all models. This is a replacement for Realistic models A0269 (pn 10539120) and A0554 (pn 10540896) telescopic antennas. *** This antenna DOES NOT fit any Bearcat, Uniden, or Regency scanners. *** This antenna DOES NOT fit any Realistic or Radio Shack scanners that use a FEMALE type threaded antenna. If your original antenna is broken off inside your scanner, this has to be removed before adding new antenna. ****** This item is an original Trademarked product of Scanner World USA, which is only available when ordered direct from Scanner World USA. BEWARE OF COUNTERFEIT PRODUCTS SOLD BY OTHER VENDORS.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul class=\"a\"\u003e \u003cli\u003eReplacement antenna for Realistic and Radio Shack scanners that use a telescopic antenna with MALE SCREW THREADS (See photo). If you are not sure or don't know the type antenna you need, Please verify correct type needed before placing an order. There are several different types of antenas available for hundreds of different model scanners and it is impossible to guess which one might be correct.\u003c\/li\u003e \u003cli\u003eBEFORE ordering please check your model scanner for correct type of screw threads. You may have to remove the cabinet of the scanner to check inside and confirm needed type by matching with original style connection.\u003c\/li\u003e \u003cli\u003eAll band coverage 30 – 900MHz - Extends from 6-1\/2\" collapsed to 32\" extended, 7 sections. Fits Realistic (Radio Shack) scanner models *** that have a 7mm or larger hole in the top of the scanner cabinet and use an antenna with MALE THREADS as shown in picture. **** If the hole is smaller than 7mm it will have to be drilled out to make a larger opening. ***\u003c\/li\u003e \u003cli\u003eThis is a replacement for Realistic (Radio Shack) antenna models A0269 (pn 10539120) and A0554 (pn 10540896) telescopic antennas. To fit you must have a 7mm or larger hole in the top of the scanner cabinet.\u003c\/li\u003e \u003cli\u003e*** This antenna DOES NOT fit any Bearcat, Uniden, or Regency scanners. *** This antenna DOES NOT fit any Realistic or Radio Shack scanners that use a FEMALE type antenna which looks very different than photo at left. Plus you must have a 7mm or larger hole in the top of the scanner cabinet for this to work. If the hole in the top of your scanner cabinet has a smaller diameter than 7mm this antenna will not work fit. You have to drill a larger hole in the cabinet that will accept this antenna.\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2019-03-01T00:05:34+11:00","created_at":"2019-03-01T00:05:34+11:00","vendor":"SCANNER WORLD, USA","type":"Radio Antennas","tags":["Accessories \u0026 Supplies","Antennas","Audio \u0026 Video Accessories","cp1939","cp231","Radio Antennas"],"price":13900,"price_min":13900,"price_max":13900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14282425925677,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B078XRTXFN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Replacement Antenna for Realistic or Radio Shack scanners That use a Telescopic Antenna with Male Screw Threads and Have a 7mm or Larger Hole in The top of The Scanner Cabinet.","public_title":null,"options":["Default Title"],"price":13900,"weight":20,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"40293110765"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61QK1S7TN8L._SL1500.jpg?v=1571709691","\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61Zk1RWGtoL._SL1500.jpg?v=1571709691","\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/511FS2TaGjL._SL1500.jpg?v=1571709691","\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61RllZzIXnL._SL1500.jpg?v=1571709691"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61QK1S7TN8L._SL1500.jpg?v=1571709691","options":["Title"],"media":[{"alt":null,"id":3455534170175,"position":1,"preview_image":{"aspect_ratio":0.826,"height":1500,"width":1239,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61QK1S7TN8L._SL1500.jpg?v=1570415679"},"aspect_ratio":0.826,"height":1500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61QK1S7TN8L._SL1500.jpg?v=1570415679","width":1239},{"alt":null,"id":3455534202943,"position":2,"preview_image":{"aspect_ratio":0.231,"height":1500,"width":347,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61Zk1RWGtoL._SL1500.jpg?v=1570415679"},"aspect_ratio":0.231,"height":1500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61Zk1RWGtoL._SL1500.jpg?v=1570415679","width":347},{"alt":null,"id":3455534235711,"position":3,"preview_image":{"aspect_ratio":0.119,"height":1500,"width":178,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/511FS2TaGjL._SL1500.jpg?v=1570415679"},"aspect_ratio":0.119,"height":1500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/511FS2TaGjL._SL1500.jpg?v=1570415679","width":178},{"alt":null,"id":3455534268479,"position":4,"preview_image":{"aspect_ratio":0.355,"height":1500,"width":533,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61RllZzIXnL._SL1500.jpg?v=1570415679"},"aspect_ratio":0.355,"height":1500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1504\/3080\/products\/61RllZzIXnL._SL1500.jpg?v=1570415679","width":533}],"content":"\u003ch3\u003eReplacement Antenna for Realistic or Radio Shack scanners That use a Telescopic Antenna with Male Screw Threads and Have a 7mm or Larger Hole in The top of The Scanner Cabinet.\u003c\/h3\u003e\u003cp id=\"b\"\u003eReplacement antenna for Realistic and Radio Shack scanners that use a telescopic antenna with MALE SCREW THREADS (See photo) and have a 7mm or larger hole in the top of the scanner cabinet. If the hole is smaller than 7mm it will have to be drilled out to make a larger opening. All band coverage 30 – 900MHz. Extends from 6-1\/2\" collapsed to 32\" extended. 7 telescoping sections which can be adjusted to the exact length as needed. Fits scanner models that have a 7mm or larger hole in the top of the scanner cabinet. (If cabinet hole is smaller than 7mm, this will not fit or work). Does not fit all models. This is a replacement for Realistic models A0269 (pn 10539120) and A0554 (pn 10540896) telescopic antennas. *** This antenna DOES NOT fit any Bearcat, Uniden, or Regency scanners. *** This antenna DOES NOT fit any Realistic or Radio Shack scanners that use a FEMALE type threaded antenna. If your original antenna is broken off inside your scanner, this has to be removed before adding new antenna. ****** This item is an original Trademarked product of Scanner World USA, which is only available when ordered direct from Scanner World USA. BEWARE OF COUNTERFEIT PRODUCTS SOLD BY OTHER VENDORS.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul class=\"a\"\u003e \u003cli\u003eReplacement antenna for Realistic and Radio Shack scanners that use a telescopic antenna with MALE SCREW THREADS (See photo). If you are not sure or don't know the type antenna you need, Please verify correct type needed before placing an order. There are several different types of antenas available for hundreds of different model scanners and it is impossible to guess which one might be correct.\u003c\/li\u003e \u003cli\u003eBEFORE ordering please check your model scanner for correct type of screw threads. You may have to remove the cabinet of the scanner to check inside and confirm needed type by matching with original style connection.\u003c\/li\u003e \u003cli\u003eAll band coverage 30 – 900MHz - Extends from 6-1\/2\" collapsed to 32\" extended, 7 sections. Fits Realistic (Radio Shack) scanner models *** that have a 7mm or larger hole in the top of the scanner cabinet and use an antenna with MALE THREADS as shown in picture. **** If the hole is smaller than 7mm it will have to be drilled out to make a larger opening. ***\u003c\/li\u003e \u003cli\u003eThis is a replacement for Realistic (Radio Shack) antenna models A0269 (pn 10539120) and A0554 (pn 10540896) telescopic antennas. To fit you must have a 7mm or larger hole in the top of the scanner cabinet.\u003c\/li\u003e \u003cli\u003e*** This antenna DOES NOT fit any Bearcat, Uniden, or Regency scanners. *** This antenna DOES NOT fit any Realistic or Radio Shack scanners that use a FEMALE type antenna which looks very different than photo at left. Plus you must have a 7mm or larger hole in the top of the scanner cabinet for this to work. If the hole in the top of your scanner cabinet has a smaller diameter than 7mm this antenna will not work fit. You have to drill a larger hole in the cabinet that will accept this antenna.\u003c\/li\u003e\n\u003c\/ul\u003e"}

Replacement Antenna for Realistic or Radio Shack scanners That use a Telescopic Antenna with Male Screw Threads and Have a 7mm or Larger Hole in The top of The Scanner Cabinet.

In Stock. Leaves warehouse in 2-3 business days

$139.00
Maximum quantity available reached.
Free Shipping Australia Wide
100% Safe & Secure Checkout
100 Days Return Policy *
1 Year Warranty *

Replacement Antenna for Realistic or Radio Shack scanners That use a Telescopic Antenna with Male Screw Threads and Have a 7mm or Larger Hole in The top of The Scanner Cabinet.

Replacement antenna for Realistic and Radio Shack scanners that use a telescopic antenna with MALE SCREW THREADS (See photo) and have a 7mm or larger hole in the top of the scanner cabinet. If the hole is smaller than 7mm it will have to be drilled out to make a larger opening. All band coverage 30 – 900MHz. Extends from 6-1/2" collapsed to 32" extended. 7 telescoping sections which can be adjusted to the exact length as needed. Fits scanner models that have a 7mm or larger hole in the top of the scanner cabinet. (If cabinet hole is smaller than 7mm, this will not fit or work). Does not fit all models. This is a replacement for Realistic models A0269 (pn 10539120) and A0554 (pn 10540896) telescopic antennas. *** This antenna DOES NOT fit any Bearcat, Uniden, or Regency scanners. *** This antenna DOES NOT fit any Realistic or Radio Shack scanners that use a FEMALE type threaded antenna. If your original antenna is broken off inside your scanner, this has to be removed before adding new antenna. ****** This item is an original Trademarked product of Scanner World USA, which is only available when ordered direct from Scanner World USA. BEWARE OF COUNTERFEIT PRODUCTS SOLD BY OTHER VENDORS.

Product Features

  • Replacement antenna for Realistic and Radio Shack scanners that use a telescopic antenna with MALE SCREW THREADS (See photo). If you are not sure or don't know the type antenna you need, Please verify correct type needed before placing an order. There are several different types of antenas available for hundreds of different model scanners and it is impossible to guess which one might be correct.
  • BEFORE ordering please check your model scanner for correct type of screw threads. You may have to remove the cabinet of the scanner to check inside and confirm needed type by matching with original style connection.
  • All band coverage 30 – 900MHz - Extends from 6-1/2" collapsed to 32" extended, 7 sections. Fits Realistic (Radio Shack) scanner models *** that have a 7mm or larger hole in the top of the scanner cabinet and use an antenna with MALE THREADS as shown in picture. **** If the hole is smaller than 7mm it will have to be drilled out to make a larger opening. ***
  • This is a replacement for Realistic (Radio Shack) antenna models A0269 (pn 10539120) and A0554 (pn 10540896) telescopic antennas. To fit you must have a 7mm or larger hole in the top of the scanner cabinet.
  • *** This antenna DOES NOT fit any Bearcat, Uniden, or Regency scanners. *** This antenna DOES NOT fit any Realistic or Radio Shack scanners that use a FEMALE type antenna which looks very different than photo at left. Plus you must have a 7mm or larger hole in the top of the scanner cabinet for this to work. If the hole in the top of your scanner cabinet has a smaller diameter than 7mm this antenna will not work fit. You have to drill a larger hole in the cabinet that will accept this antenna.

Buy with confidence as this product comes with 18 months full local warranty in Australia & New Zealand (unless otherwise stated in the overview).

This product also comes with the benefits of the CocoonPower Warranty. For further details please read our Warranty Guidelines.

You can also purchase 3 Year Extended Care. If you are interested please see our Extended Care Information.

Related Products