Zircon MultiScanner A250 Electronic Wall Scanner/Center Finding and Edge Finding Australia
Zircon MultiScanner A250 Electronic Wall Scanner/Center Finding and Edge Finding Stud Finder/Metal Detector/Live AC Wire Detection and Scanning
The MultiScanner A250 is Zircon’s newest electronic stud finder, metal detector and live AC scanner that is sold exclusively on Seller. The A250 is designed with a smooth, ergonomic rubber grip allowing for a comfortable yet secure hold for any size hand, at any angle. This multifunctional surface scanner uses the most recent technology in density detecting software and circuitry. The Zircon A250 has a 4-mode selector switch making it easy to change functions while the ultra-bright LCD screen, patented SpotLite Pointing System, and audio tone all indicate the location of the target. This Zircon scanner also comes equipped with a Signal Strength Indicator that helps to distinguish between shallow and deep targets.
The MultiScanner A250 includes a backlit display for hard to see places and ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a Low Battery Indicator to alert its users to replace its battery for optimal performance results. The tool constantly scans its surroundings and recalibrates itself if necessary. The scanner has 2 stud scanning modes to locate the center, edges, and direction of wood and metal studs and joists behind walls, floors, and in ceilings. In StudScan Mode, the MS A250 scans up to 0.75 of an inch (19 mm) deep. Switch over to DeepScan Mode to double the scanning depth to 1.5 inches (38 mm). Metal Scan Mode locates non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Metal Scan Mode finds studs behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs.
The A250 is programmed with a Wire Warning Detection feature that indicates the presence of live, unshielded electrical wires up to 2 inches (50 mm) deep when using StudScan, DeepScan and Metal Scan Mode. In addition to Wire Warning Detection, the A250 also includes AC Scan Mode to detect, locate, map, and trace live wires. The Zircon MultiScanner A250 is a perfect choice for serious users, such as home improvement hobbyists and professional contractors. With the Zircon MultiScanner A250, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.
- Wire Warning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan, DeepScan, and Metal Scan modes
- Signal strength indicators help distinguish shallower targets from deeper ones as act (auto correcting technology) automatically corrects common user errors, such as when scanning begins over a stud
- Ergonomically designed grip allows a comfortable hold on the tool for any size hand, at any angle while the patented spotlite pointing system clearly indicates the target location
- One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance to help you easily find studs, metal and live AC wiring while avoiding electrical hazards.
Buy with confidence as this product comes with 18 months full local warranty in Australia & New Zealand (unless otherwise stated in the overview).
This product also comes with the benefits of the CocoonPower Warranty. For further details please read our Warranty Guidelines.
You can also purchase 3 Year Extended Care. If you are interested please see our Extended Care Information.